Silicone gloves, medical equipment accessories, medical grade silicone, biocompatibility indicators, performance, manufacturer direct sales

一、Rigid Performance Requirements for Silicone Raw Materials

1. Basic Material & Process Specifications
   Raw Material Type: Medical-grade platinum-cured silicone rubber (select either LSR liquid silicone rubber or solid high-temperature medical silicone rubber). Peroxide-cured raw materials are prohibited (small molecule precipitates may irritate skin).

   Curing Process: Secondary high-temperature post-curing to fully volatilize small molecules; finished products shall contain no volatile organic compounds (VOCs) and exhibit no oil bleeding.
   Compliance Certifications: The original raw material manufacturer shall provide ISO 10993 biocompatibility test reports, RoHS compliance reports, and phthalate-free test reports. All materials shall comply with the medical 

2. Product Specifications

   Product Name	Grip Silicone Sleeve
   Product Specifications	30 × 35 × 120 mm
   Color	Black
   Hardness	Shore A 35–50

二、Technical Data

1. Test Item	Technical Requirement	Function Description
   Shore A Hardness	35~55 (Customizable per equipment requirements)	Too soft leads to easy deformation; too hard causes discomfort to hands. This hardness range fits rehabilitation patients with weak grip strength.
   Tensile Strength	≥4.5 MPa	Resists breakage under frequent gripping and pulling.
   Elongation at Break	≥600%	Good rebound after compression; no permanent collapse under long-term deformation.
   Tear Strength	≥18 kN/m	Edges resist cracking during collision, assembly and disassembly.
   Compression Set	≤8% (70°C × 22 h)	Rapid rebound after prolonged squeezing without indentation.
   Water Absorption Rate	≤0.1%	Waterproof and sweat-proof; no water absorption or swelling after disinfection.
   Comply with RoHS and REACH standards

   三、Production Process

   This matte anti-slip silicone grip sleeve is integrally formed via high-temperature compression molding on a plate vulcanizing machine. Solid matte silicone is mixed and color-matched, then vulcanized under high temperature and pressure inside tubular molds for one-step molding.

   Multiple full inspection procedures are carried out in a dust-free workshop. The finished products feature no burrs, zero air bubbles, uniform matte texture, stable dimensional tolerance, excellent wear resistance and anti-slip performance. Custom specifications are available upon request.

   
   

   四、Product Application Scenarios
   This silicone grip sleeve is specially designed for the handrails of bedside lower limb active-passive rehabilitation machines. It is supporting equipment for rehabilitation departments, geriatric care facilities and neurology rehabilitation devices.Intended for long-term gripping by patients with limited mobility, limb weakness or those recovering after surgery. It integrates medical safety, anti-slip protection, ergonomics and durability with easy-to-clean properties. Custom mold opening service is available to match the dimensions of original equipment handrails.