Silicone sealing ring for remote control button

Functions & Applications • Command Triggering: Precisely control the on/off of solenoid valves to realize the switching of steering gear hydraulic oil circuits and complete functions such as course keeping and steering adjustment. • Protective Sealing: The keys fit tightly with the panel to prevent seawater, moisture and oil contamination from invading the solenoid valve control module and improve equipment reliability. • Human-Computer Interaction: Adapt to the A800E operating logic, including key functions such as automatic/manual mode switching, sensitivity adjustment and fault reset, with clear operation feedback.  Customization & Selection Key Points 1. Dimension Matching: Must match the opening size and key spacing of the A800E solenoid valve panel; for integrated keys, verify the overall contour and positioning hole positions. 2. Key Characteristics: Select key force (150-500g) and stroke according to control requirements; high-rebound silicone formula is recommended for high-frequency operation keys. 3. Contact Configuration: Conductive carbon particles are suitable for general working conditions; gold-plated shrapnels are adapted to the requirements of high reliability and long service life (≥1 million presses). 4. Environmental Adaptation: For maritime environments, select formulas resistant to salt spray and ultraviolet rays; additional surface coating can be applied to enhance wear and stain resistance.  Installation & Maintenance • Installation: Clean the panel openings and fix with silicone-specific adhesive to ensure the sealing lips fit completely, avoiding water ingress caused by loose fitting. • Maintenance: Wipe the key surface with anhydrous ethanol regularly and check the rebound and conductive performance. Replace immediately if damaged or aged (such as cracking and loss of elasticity) to prevent mis-triggering of solenoid valves.